View Full Version : 07 Polaris 600 IQ Bar Risers?
bardell05
11-12-2008, 03:45 AM
I want to raise my handle bars on my new snowmobile and i was wondering what anyone can reccomend for a kit? Do i have to lengthen any of the cables?
Iowarider
11-12-2008, 01:34 PM
I put 2" risers on my 06 Switchback without any changes. A taller riser might need longer cables. The 2" risers made a big differnce.
PAULARIS600
11-12-2008, 04:31 PM
i put 2" on 06' fusion with no problems. 3" and up you may need ext for cables. but don't quote me on that.
polarisracingboy
11-26-2008, 08:23 AM
i put 2" on 06' fusion with no problems. 3" and up you may need ext for cables. but don't quote me on that.
Unbolt the handle bars. Then pull up on them and measure to see how high you can raise then while leaving a little slack for left/right movement. This will tell you how much riser you can put on. (madam328) I am doing the same thing but with one of my 05' xcsp. It measures to be about 3" 1/8". 2" will be okay but three is pushing the left/right movement.