stewart20
01-17-2008, 03:07 PM
does anyone know if it is possible to take a extra12 fox skid of a 95 rxl and put it on a 95 supersport if so how much work is involved.also how do you remove a track,and the seat.
jredneck73
01-17-2008, 03:34 PM
You can put the extra 12 into that sled but you would want to the extra 12 in the front also . As for the seat removal you have to remove 2 bolts from the rear part of the seat in rear trunk area that go down through the tunnel .When you get those out lift up alittle bit and pull back and unplug the wires for the tail light . might have to undo the springs on the tank to get at the plug in . If you need more info on the skid change just ask and I'll try to answer because you'll have to do a lot of measuring to get it done , but it is very doable .