Results 1 to 5 of 5

Thread: DO UFOs WORK

  1. #1
    Junior Member
    Join Date
    Feb 2008
    Posts
    10

    DO UFOs WORK

    NEED YOUR INPUT ON UFOs AND IF THEY WORK IN ROUND SLIDE CARBS I HAVE A 98 FORMULA Z 670 LET ME KNOW

  2. #2
    Senior Member
    Join Date
    Feb 2003
    Posts
    160
    Yes they will work in your round slides but they do require quite a bit of tuning in the begining with alot of plug chops.

  3. #3
    Senior Member
    Join Date
    Jan 2006
    Posts
    253
    this also requires you to do some filing on your slides and this is non-reversible so you will have to get new slides if you don't like your results and want to go back stock. you need to probably go with the smallest pilot jets you can get and still be too rich at idle. I used them and was not happy with the results, maybe your luck will be better. Just remember, its always better to start rich and slowly lean it down till you get what you want. Start out lean and you will burn it down before you know what happened!!

  4. #4
    Junior Member
    Join Date
    Feb 2008
    Posts
    10
    Burn downs been there done that many times it runs well now just trying to get a little more out of it i dont think ill be getting them if i have to file my slides thanks guys

  5. #5
    Senior Member
    Join Date
    Jan 2006
    Posts
    253
    The only filing that needs to be done is to make a smooth transition between the slide and the insert, in other words, not much. However, this will alter your slides a bit.

Similar Threads

  1. what parts will work
    By fast cat in forum Tech Tips
    Replies: 0
    Last Post: 02-16-2009, 02:57 PM
  2. Day At Work Gone Bad!
    By PAULARIS600 in forum General Talk
    Replies: 9
    Last Post: 09-24-2008, 04:40 PM
  3. Is there any reason this wont work?
    By Patrick11 in forum Sled Talk
    Replies: 7
    Last Post: 02-10-2008, 08:57 AM
  4. How's this thing work
    By jsimmons in forum General Talk
    Replies: 5
    Last Post: 11-12-2007, 02:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •