Anyone have their 2010 Z1 Turbo LXR Yet?

**Ray and Paula** · 10-29-2009, 03:35 AM

Hi,
I am getting ready to order some ski carbides for a 2010 Z1 Turbo LXR that I have ordered. I need to know how many bolt's there are and the bolt pattern if you have taken delivery of this particular sled. Why? Because I want to make sure before ordering due to some dealer's stating it has three bolts, with others stating it has four. I would like to have the carbides when I take delivery. Your help would be most appreciated. Thanks, Ray

**YamaDooed** · 10-29-2009, 04:10 AM

Won't yer dealer give yalls credit for the krappy stock carbides on an upgrade purchase??? Shouldn't need a set for a few hundo miles after that...

**Ray and Paula** · 10-29-2009, 04:23 AM

No they won't..... which really

pi*!_* me off!

**madam328** · 10-29-2009, 04:28 AM

I would suggest the Stud Boy Shaper Bars from USI Inc. out of indiana I believe. They have part numbers on their website for 07-10 Z1's. If you are running studs, which I think I saw you are, I would go with the 7.5" or 9" carbide. The shaper bars really help with handling in the corners over the round bars. http://www.usi-skis.com/index.php?pa...mart&Itemid=85

**Ray and Paula** · 10-29-2009, 04:44 AM

Thanks for the help. I went to Arctic cat's Parts web site (link below). It shows different bolt patterns for the 2009 and 2010's Z1 Turbo LXR's. Don't know why there's a change. Thanks again, Ray
http://arcticcat.arinet.com/Empartwe...t&partner=ARCC