Just wondering if anyone may have had an issue with a speedo or tach on a ski-doo Rev 500ss???? Sled runs absolutely perfect but the speedo will not go any lower than 30 mph, even when the sled is not running or is at idle, it reads 30 mph and then as you increase speed the speedo will read 100+ mph when I am actually only going 35 or 40 mph????? The tach reads zero and seems to read accurately at idle, but then as the speed is increased, the tach reads over 10,000 as you ride?????? any ideas????
All wires appear intact and nothing is wet or has water in it???????
I appeciate any and all areas to troubleshoot this problem. thanks


Reply With Quote

Bookmarks