1995 Polaris RXL

[bools24]

I have a Polaris RXL from 95 that i had to replace the tunnel recently. I wrote down all the wires for re-assembly but forgot the black with white tracer off the CDI. It Anyone know what this wire should plug into. Don't want to risk frying the system by pluging this into the wrong wirte. In the repair manual, it shows it should plug into a wite with black tracer. Any help would be greatly appreciated.

[jredneck73]

I got the same sled sitting in front yard and love it . Took my air box out and took a peek at it and that is what it is pluged into .

[bools24]

OK, I see tin he manual info, but where is the white with black tracer wire. I currently have three other wires with the silar single wire connection. Two are on the harness where the leads for the fuel pump come out. One wire is Brown with a black spot, the other is white w black tracer. If this white w/black tracer goesto CDI, then where does the brown with the black dot tracer plug into. As a side note, the last wire that I cannot find out a apurpose for is all black down in the harness where the rectifier in front of the chain case is. It leads back up towards the EFI, but I didn't mark what this originally plugged into either(my bad).

[jredneck73]

Well I would go outside and check for you but it is a blizzard out there . So that is out of the question . That and I got to pull out my air box to take a gander at the wiring . Shoot a pm over to stewart20 and ask him if he could look at his RXL wiring .